GM Training - August 2009 New Course Information (For U.S. Dealers and Aftermarket) (09-00-89-035)

Publication date: 2009-08-10
Reference number: 09-00-89-035

GM Training - August 2009 New Course Information (For U.S. Dealers and Aftermarket)

TECHNICAL SERVICE BULLETIN

Reference Number(s): 09-00-89-035, Date of Issue: August 10, 2009

Affected Model(s):

2010 and Prior GM Passenger Cars and Light Duty Trucks (including Saturn); 2010 and Prior HUMMER H2, H3 Vehicles; 2009 and Prior Saab 9-7X

Purpose/Overview

The following is a list of new courses now available:

July Service Know How Emerging Issues Seminar (10209.07D)
TECHAssists on the Web
- Continuous Damping Control System (13044.16T1)
- Windshield Temperature Inside Moisture Sensor (11044.14T1)
- Continental ABS New Features (15045.16T1)
- OnStar Generation 8 (19040.36T1)

Complete Information

The GM Service Technical College (STC) releases WBT, IDL and Hands-On training components. Manager approval is not required to enroll in a WBT or IDL component, however, depending on how your dealership is set up within GM Training, you may have a two-step enrollment process for a Hands-On course, which requires a Service Manager's approval if travel is necessary.

For U.S. Dealers, visit www.gmtraining.com .

For Aftermarket retailers, visit the ACDelco TechConnect Website at http://acdelcotechconnect.com .