LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Column & Steering Column Switches >> System Tests >> Test I: High Lock Effort

Test I: High Lock Effort

  1. After reviewing ignition lock system description perform PRELIMINARY INSPECTION  under TROUBLE SHOOTING. After performing preliminary inspection, go to next step.
  2. Verify that lock system has high lock effort. If lock system has high lock effort, go to next step. If lock system operates normally, system is okay.
  3. Check for incorrect, worn or damaged keys. If all keys are okay, go to next step. If keys are not okay, go to step  7 .
  4. Check for faulty lock cylinders. If no lock cylinders are damaged, go to next step. If any lock cylinder is damaged, go to step  8 .
  5. Check lock module assembly for damage. If lock module is not damaged, go to next step. If lock module damaged, go to step  9 .
  6. Check ignition switch assembly for damage. If ignition switch assembly is not damaged, go to next step. If ignition switch assembly damaged, go to step  10 .
  7. Replace ignition key. Ensure key is same mechanical cut as original key. After repairs are made, go to step  11 .
  8. Replace lock cylinder. See IGNITION LOCK CYLINDER  under REMOVAL & INSTALLATION. After repairs are made, go to step  11 .
  9. Replace steering column. See STEERING COLUMN  under REMOVAL & INSTALLATION. After repairs are made, go to step  11 .
  10. Replace ignition switch. See IGNITION SWITCH  under REMOVAL & INSTALLATION. After repairs are made, go to next step.
  11. Operate lock system to verify repairs. If lock system operates normally, testing is complete. If lock system does not operate normally, go to step  3 .
scientia non olet · About LEMON Manuals