LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column & Steering Column Switches >> Removal & Installation >> Park Pawl Actuator >> Installation

Park Pawl Actuator: Installation

  1. Connect harness connector.
  2. Rotate park position switch to install.
  3. Install tie straps from park position strip.
  4. Install steering column trim covers.
Fig 1: Removing & Installing Parking Pawl Actuator
G00063699Courtesy of GENERAL MOTORS CORP.