Rear Brake Shoes
- Release parking brake. Raise and support vehicle. Remove wheels and drums. Ensure parking brake cable, linkage and secondary (rear) shoe levers have free movement.
- If using Brake Drum Gauge (J-21177), go to next step. If not using Brake Drum Gauge (J-21177), turn adjuster wheel until diameter of brake shoes is (.050" (1.27 mm) less than inside diameter of brake drum. Go to step 4).
- Measure inside diameter of brake drum using inside caliper portion of Brake Drum Gauge (J-21177). Turn adjuster wheel until brake shoes contact outside caliper portion of brake drum gauge.
- Install drums and wheels. Tighten wheel lug nuts to specification. See TORQUE SPECIFICATIONS . Lower vehicle. Drive vehicle, making several alternate forward and backward stops, applying brakes firmly.