Indicator & Gauge PINOUT Test
Check voltage or resistance at the IPC connector to determine if proper signals are supplied to the IPC. See Fig 1 . Also, refer to the IPC CONNECTOR PINOUT TEST table.
IPC CONNECTOR PINOUT TEST
| Application | Wire Color | Pin |
|---|---|---|
| Fuse Output | Orange | A1 |
| Serial Data Signal | Tan | A2 |
| Fuse Output | Purple | A3 |
| Left Turn Indicator | Lt. Blue | A4 |
| Ground | Black | A5 |
| Traction Control Switch Input | Gray | A6 |
| Daytime Running Lights Relay | Lt. Green/Black | A7 |
| Check Engine Output | Brown/White | A8 |
| Instrument Panel Feed | Gray | A9 |
| Not Used | Not Used | A10-11 |
| Not Used | Not Used | B1 |
| Vehicle Speed Signal | Dk. Green/White | B2 |
| From Gauges Fuse | Pink/Black | B3 |
| Malfunction Indicator Light | Brown/White | B4 |
| Coolant Temp. Gauge | Dk. Green | B5 |
| Ground | Black | B6 |
| IPC Lights | Gray | B7 |
| Volts Indicator | Brown | B8 |
| Oil Pressure | Tan | B9 |
| Not Used | Not Used | B-10 |
| Not Used | Not Used | B-11 |