Cylinder Block
CYLINDER BLOCK
| Application | In. (mm) | |||
|---|---|---|---|---|
| Cylinder Bore | ||||
| Diameter (1991-93) | 3.6224-3.6231 )92.010-92.028) | |||
| Diameter (1994-97) | 3.6228-3.6235 (92.020-92.038) | |||
| Out-Of-Round (Maximum) (1991-93) | .0003 (.007) | |||
| Out-Of-Round (Maximum) (1994-97) | .0004 (.010) | |||
| Taper (Maximum) | .0005 (.013) | |||
| Deck Warpage (Maximum) | (1) .004 (.10) | |||
|
||||