LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1995 >> Firebird Formula, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical 3.8L V6 - VIN [K] >> Removal & Installation >> Intake Manifold (Upper) >> Installation

Intake Manifold (Upper): Installation

  1. Ensure sealing surfaces, bolt threads and bolt holes are clean. Install manifold and gaskets.
  2. Tighten intake manifold bolts to specification in sequence. See Fig 1 or Fig 2 . Refer to TORQUE SPECIFICATIONS  . Lubricate fuel rail "O" rings with engine oil. To complete installation, reverse removal procedure. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING  .
Fig 1: Upper Intake Manifold Bolt Tightening Sequence - All Except "F" Body
G97B03612Courtesy of GENERAL MOTORS CORP.
Fig 2: Upper Intake Manifold Bolt Tightening Sequence - "F" Body
G97D03613Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals