LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1995 >> Firebird Formula, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical 3.8L V6 - VIN [K] >> Removal & Installation >> Cylinder Head >> Installation

Cylinder Head: Installation

  1. Ensure cylinder head bolt threads and cylinder block holes are clean. Ensure all gasket holes align with cylinder block. Apply GM Sealant (1052080) to cylinder head bolt threads.
  2. Install cylinder head. Tighten bolts to specification in sequence. See TORQUE SPECIFICATIONS  . To complete installation, reverse removal procedure. See Fig 1 . Coat rocker arm bolts with GM Threadlock (12345493).
Fig 1: Cylinder Head Bolt Tightening Sequence
G90A04729Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals