LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1995 >> Firebird Formula, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine Mechanical 3.8L V6 - VIN [K] >> Overhaul >> Cylinder Head Overhaul >> Inspection

Cylinder Head Overhaul: Inspection

  1. Inspect cylinder head for warpage at deck and manifold surfaces. Resurface cylinder head if warpage exceeds specification. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS.
  2. After resurfacing, use a depth micrometer to measure distance from deck surface to 3 cast pads. See Figure . Replace cylinder head if dimension is less than .044" (1.12 mm). New cylinder head dimension should be .054-.066" (1.37-1.68 mm).
scientia non olet · About LEMON Manuals