Installation (Bonneville, DeVille/Sixty-Special, Eighty-Eight, LeSabre, Ninety-Eight, Park Avenue)
To install, reverse removal procedure. Tighten bushing clip bolt to specification with vehicle at normal operating height. See appropriate TORQUE SPECIFICATIONS table at the end of this article.
Fig 1: Exploded View Of Stabilizer Bar Bonneville, DeVille/Sixty-Special, Eighty-Eight, LeSabre, Ninety-Eight, Park Avenue
NOTE:
On "E" & "K" bodies, stabilizer bar replacement may be more easily completed with vehicle at curb height and supported by wheels. Use drive-on type hoist. If using a frame contact hoist, support control arms as far outboard as possible, without allowing hoist to contact struts.