LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> Bonneville SE >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Control Arm Bushing >> Removal (Inner Control Arm Bushing) Eldorado, Riviera and Seville

Removal (Inner Control Arm Bushing) Eldorado, Riviera and Seville

  1. Remove control arm. See CONTROL ARM  . To remove bushing, install Spacer Set (J-35739-1 ) between control arm flanges. Use narrow spacer for inner bushing removal.
  2. Coat threads of bolt and bearing with grease. Install Remover (J-21474-23 ), Receiver (J-21474-5 ), Nut (J-21474-18 ), Bolt and Bearing (J-21474-19 ) in control arm. See Figure . Tighten nut to remove bushing.
scientia non olet · About LEMON Manuals