LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> Bonneville SE >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Adjustments >> Wheel Bearing >> Inspection

Wheel Bearing: Inspection

  1. Raise and support vehicle. Remove wheel. Remove brake drum, or caliper and rotor.
  2. Mount dial indicator with stem resting against hub. Push inward on hub. Adjust indicator to zero. Pull outward and note reading. Replace hub and bearing assembly if movement exceeds .005" (.127 mm).
scientia non olet · About LEMON Manuals