Post-Collision Air Bag Safety Inspection
POST-COLLISION AIR BAG SAFETY INSPECTION
| Action | Component |
|---|---|
| Replace After Deployment | Air Bag Module(s) Sensors In Area Of Accident Damage |
| Inspect & If Damaged, Replace Component (Even If Air Bag Did Not Deploy) | Instrument Panel Braces Instrument Panel Steering Column Reinforcement Plate Knee Bolsters & Mounting Points Seat Belts & Mounting Points Sensors In Area Of Accident Damage (Without Deployment) SIR Coil Assembly Steering Column Steering Wheel |
| Comments | Any sensor which the Diagnostic Energy Reserve Module (DERM) or Sensing & Diagnostic Module (SDM) indicates as bad must be replaced. If any components are damaged or bent, they must be replaced. SRS wiring can be repaired following manufacturer's instructions. |