Code 26 - Driver Initiator Circuit Open: Description

Code 26 sets when failure conditions are met during Diagnostic Energy Reserve Module (DERM) CONTINUOUS MONITORING tests. These tests are performed for one second after initial TURN-ON tests are completed and every 100 milliseconds while IGNITION 1 voltage is present at DERM. CONTINUOUS MONITORING tests check both deployment loops for continuity from DERM 36VLR outputs through dual pole arming sensor, inflator modules, SIR coil and discriminating sensors to ground. Code 26 indicates a disconnected or damaged steering column connector, an open in steering column harness wiring, an open SIR coil or an open in driver inflator module.