LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> Bonneville SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" V6 - VIN [L] >> Removal & Installation >> Torque Axis Engine Mount >> Removal

Torque Axis Engine Mount: Removal

  1. Disconnect negative battery cable.
  2. Using engine support fixture J 28467-A and lifting bracket J 38854, raise engine slightly to take weight off engine mounts.
  3. Remove accessory drive belt(s).
  4. Remove through bolt from torque axis (front) engine mount.
  5. Lift engine with support fixture until power steering reservoir touches strut tower cross brace.
  6. Loosen bottom two bolts on torque axis (front) engine mount.
  7. Remove A/C line clip and top two bolts on torque axis (front) engine mount and remove mount.
  8. Remove two bolts and nut attaching engine torque axis mount bracket assembly to front of engine.
scientia non olet · About LEMON Manuals