LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> Bonneville SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" V6 - VIN [L] >> Removal & Installation >> Crankshaft Balancer >> Removal

Crankshaft Balancer: Removal

  1. Hold flywheel with J 37096. Remove balancer bolt. Install crankshaft puller J 38197 to puller to pulley and tighten puller bolt to remove pulley.
NOTE: The balancer is serviced as an assembly. Do not attempt to separate pulley from balancer hub.
scientia non olet · About LEMON Manuals