LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> Bonneville SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" Supercharged V6 - VIN [1] >> Removal & Installation >> Cylinder Head >> Removal

Cylinder Head: Removal

  1. Remove intake manifold. See INTAKE MANIFOLD under REMOVAL & INSTALLATION. Remove exhaust manifold. See EXHAUST MANIFOLD under REMOVAL & INSTALLATION.
  2. Remove rocker arm cover. See ROCKER ARM COVERS AND/OR GASKET under REMOVAL & INSTALLATION. Remove electronic ignition and spark plug wires. Disconnect the generator bracket, one A/C compressor bracket bolt, the power steering pump, and the belt tension assembly.
  3. Remove the fuel pipe heat shield. Remove the rocker arm assemblies and pushrods. Remove the cylinder head bolts and cylinder head
scientia non olet · About LEMON Manuals