LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> Bonneville SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" Supercharged V6 - VIN [1] >> Removal & Installation >> Camshaft Bearings >> Removal

Camshaft Bearings: Removal

  1. Remove camshaft. See CAMSHAFT under REMOVAL & INSTALLATION.
  2. Remove camshaft rear plug. Using J 33049 (Camshaft Bearing Remover/Installer), assemble tool according to manufacturer's recommendations.
  3. Remove camshaft bearings.
NOTE: Never reuse camshaft bearings once they have been removed. Always install new bearings.
scientia non olet · About LEMON Manuals