LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1993 >> Bonneville SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L "3800" Supercharged V6 - VIN [1] >> Removal & Installation >> Accessory Drive Belt >> Removal (Accessory Drive Belt Tensioner Bracket)

Removal (Accessory Drive Belt Tensioner Bracket)

  1. Remove negative battery cable. Remove outer and inner accessory drive belts. Remove generator bolts and set generator aside. Drain cooling system. Disconnect heater hoses from pipes and pipes from engine.
  2. Raise vehicle and suitably support. Remove lower bracket to transaxle bracket bolt. Disconnect power steering hoses. Remove power steering pump and set aside. Lower vehicle.
  3. Remove tensioner bracket bolts, nut from supercharger to bracket stud and bracket.
scientia non olet · About LEMON Manuals