LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1992 >> Trans Sport SE, 3.8 L >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Wheel Hub & Bearing Assembly >> Installation

Wheel Hub & Bearing Assembly: Installation

  1. Install the hub and bearing assembly to rear axle. Tighten bolts to specification. See TORQUE SPECIFICATIONS  . Be careful not to drop hub and bearing assembly, as damage to the bearing could result.
  2. Install brake drum.
  3. Install wheel speed sensor connector to hub (if equipped).
  4. Install tire and wheel assembly.
  5. Lower vehicle.
scientia non olet · About LEMON Manuals