LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1992 >> Trans Sport SE, 3.8 L >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> Upper Shock Absorber Mount >> Installation

Upper Shock Absorber Mount: Installation

  1. Install shock absorber mount studs in holes in shock tower. See Figure .
  2. Install nuts and tighten to specification. See TORQUE SPECIFICATIONS  .
  3. Install shock absorber stud to mount, and tighten upper nut to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals