BRAKE Light Inoperative
- Turn ignition switch to RUN position. Connect test light between ground and instrument cluster connector terminal D5. See Figure . If test light does not come on, repair open in Pink/Black wire between fuse and instrument cluster.
- If test light comes on, connect test light between ground and instrument cluster connector terminal C5. If test light does not come on, repair open in Pink/Black wire between fuse and instrument cluster. If test light comes on, connect fused jumper wire between ground and instrument cluster connector terminal D14.
- If BRAKE light comes on, repair open in Tan/White wire between instrument cluster and splice. If BRAKE light does not come on, check BRAKE light bulb. If bulb is okay, replace instrument cluster.