Torque Converter Clutch (TCC) Solenoid

TORQUE CONVERTER CLUTCH (TCC) SOLENOID 4T60 (440-T4)

REMOVE OR DISCONNECT
1. Case side cover pan. Refer to "Case Side Cover and Gaskets".
2. Screws retaining solenoid.
3. Electrical connector and solenoid.

INSTALL OR CONNECT
1. Electrical connector and solenoid.
2. Retaining screws.

TIGHTEN
^ Screws to 14 Nm (125 lb.in.).

3. Case side cover pan. Refer to "Case Side Cover and Gaskets".

Adjust
^ Fluid level.