LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1989 >> Safari >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L (307") V8 - VIN [Y] >> Removal & Installation >> Valve Covers >> Installation

Valve Covers: Installation

Clean sealing mating surfaces. Apply 1/4" bead of Sealer (1052915) to valve cover. Sealer should be on inner side of bolt holes. Install and tighten valve cover. To complete installation, reverse removal procedure.

NOTE: Check and record compression before removal. Ensure components are installed to original position and location.
scientia non olet · About LEMON Manuals