LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1989 >> LeMans Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Removal & Installation >> Disc Brake Hub & Wheel Bearing

Disc Brake Hub & Wheel Bearing

For disc brake hub and wheel bearing removal and installation procedures, see SUSPENSION - FRONT article.

CAUTION: When necessary to remove and reinstall brake caliper for any overhaul procedure, knuckle bolt holes must be tapped with a 12 X 1.5 mm tap to remove residue from factory installed bolts. New bolts must be coated with locking compound prior to installation.
scientia non olet · About LEMON Manuals