Front Engine Cover: Removal
- Remove torsional damper as previously outlined. Remove air injection pump pulley and air management valve adapter. Remove air injection pump bolts and pump. Disconnect fuel inlet and return lines.
- If equipped, remove rear A/C compressor braces and lower A/C mount bolts. Remove compressor bracket nuts at water pump. Slide mounting bracket forward and remove compressor mount bolt. Disconnect wires at compressor and lay unit aside.
- Disconnect air injection hose at right exhaust manifold. Remove compressor mount bracket. Remove upper air injection pump bracket with power steering reservoir. Remove lower air injection pump bracket.
- Drain cooling system. Disconnect radiator and heater hoses. Remove water pump. Remove front cover retaining bolts, cover and gasket.