LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1987 >> Safari >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.0L (307") V8 - VIN [Y] >> Removal & Installation >> Water Pump >> Installation

Water Pump: Installation

If installing new water pump, transfer pulley from old pump. Apply bead of sealant to water pump sealing surface. While sealant is wet, install water pump. Tighten attaching bolts. Install accessory drive belts. Connect battery.

NOTE: For information on cooling system capacities and other cooling system components, see ENGINE COOLING SYSTEMS article in this section.