Removal & Installation: Camshaft: Removal
- Disconnect upper and lower transmission cooler lines, if equipped. Remove fan shroud, radiator (and grille, if necessary). Remove torsional damper, water pump and front engine cover. See FRONT ENGINE COVER .
- Remove intake manifold. See INTAKE MANIFOLD .
- Remove fuel pump. Remove fuel pump (mechanical) push rod. Rotate crankshaft and align timing marks. Remove camshaft bolts, camshaft gear and timing chain. Install two 5/16"-18 x 4" bolts in camshaft bolt holes and carefully remove camshaft.
NOTE:
All camshaft journals are same diameter. Use care when removing camshaft to prevent damage to lobes or journals.