LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1987 >> 1000 2D Hatchback, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Speedometer Cluster, Instrument Panel & Printed Circuits >> Removal & Installation (Models Exc. Grand Am)

Removal & Installation (Models Exc. Grand Am)

  1. Disconnect negative battery cable. Remove clock stem knob. Remove lower trim plate(s), cluster trim plate and steering column trim covers (if equipped). Remove speedometer cluster retaining screws.
  2. On Sunbird models, loosen steering column retaining bolts and lower steering column. On 6000 models, remove speedometer cluster bezel and lens.
  3. On all models, pull cluster out slightly and disconnect speedometer cable and wiring harness connector(s). Remove speedometer cluster. On 6000 models, remove auxiliary instrument (or warning light) cluster. Remove trim plates and cluster retaining screws.
  4. Pull out cluster, disconnect wiring harness connector(s) and remove cluster. Remove printed circuit. Remove snap-in bulbs and wiring harness connectors from back of speedometer cluster. Remove nuts retaining circuit to housing and remove printed circuit. Reverse removal procedure to install.
scientia non olet · About LEMON Manuals