Exhaust - Manifold Replacement

88pontiac22

Bulletin Number: 88-6-79
Reference Number: 836124

Publish Date: 11/88
Subject: EXHAUST MANIFOLD REPLACEMENT


Models

Affected: 1985-88 FIERO WITH 2.8L (VIN CODE 9) ENGINE


Some 1985-88 Fiero models with a 2.8L engine may experience a broken exhaust manifold bolt.

To repair a broken exhaust manifold fastener, refer to Labor Operation Procedure J0101. An add time of .5 hour may be used to drill and tap the broken fastener.

NOTICE: IT IS NOT REQUIRED TO REMOVE THE ENGINE ASSEMBLY FROM THE VEHICLE TO SERVICE THE EXHAUST MANIFOLD SYSTEM.

Warranty Information

Labor Operation: J0101

Labor Time : 1.7 Hours (To Replace Manifold)

Add Time : .5 Hour (To drill and tap)