A/T - Possible Reuse Hex Head Screws & Conical Washers
Number 85-7-7 Date 2/85Subject: USAGE OF HEX HEAD SCREWS AND CONICAL WASHER ASSEMBLIES - THM TRANSMISSIONS OR TRANSAXLES
HEX HEAD SCREW AND CONICAL WASHER ASSEMBLY:
When servicing any THM transmission or transaxle and removal of the side cover and/or bottom pan is required, IT IS NOT ALWAYS NECESSARY TO REPLACE THE HEX HEAD SCREWS AND CONICAL WASHER ASSEMBLIES..
NOTICE: Screws with coating stripped away exposing the exterior portion of the head or washer, should be replaced. Also, replace those Hex Head Screws if the washer is inverted. (See ILLUSTRATION BELOW).
Insert this information in the appropriate section of your 1985 service manual.