LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1985 >> Fiero GT, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension - Rear >> Removal & Installation >> MACPHERSON Strut & Coil Spring >> Removal

MACPHERSON Strut & Coil Spring: Removal

  1. Remove 3 strut upper mount nuts. Raise vehicle, support on frame and remove wheel. Remove brake line clip. Install Axle Boot Protector (J-33162 ).
  2. Disconnect axle shaft from transaxle. Scribe knuckle and strut for reinstallation. Remove 2 strut-to-knuckle bolts, noting their positions for reinstallation. Remove strut.
scientia non olet · About LEMON Manuals