One Headlight Door Not Operating
- Remove connector C2 from actuator relay and place headlight switch in "ON" position. Test for battery voltage at terminal 5. If zero voltage is registered, replace actuator relay. If battery voltage registers, proceed to step 2).
- With switch in "ON" position, test for continuity at terminal 6 of actuator relay with self powered test lamp to ground. If test lamp does not light, replace actuator relay. If lamp lights, proceed to step 3).
- Test for battery voltage at connector C101 (left-hand) or C102 (right-hand). If battery voltage is registered, replace actuator. If zero voltage is registered, inspect and repair Dark Blue wire (left-hand) or Dark Blue/White wire.