LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1984 >> Fiero Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel - Standard >> Removal & Installation >> Speedometer Cluster, Instrument Panel & Printed Circuits >> Removal & Installation (Front Wheel Drive Models)

Removal & Installation (Front Wheel Drive Models)

  1. Disconnect battery. Remove clock stem knob. Remove lower trim plate(s), cluster trim plate and steering column trim covers (if equipped). Remove speedometer cluster retaining screws.
  2. On 2000, loosen steering column retaining bolts and lower steering column. On Phoenix, disconnect shift indicator detent cable after marking location of cable on steering column shift bowl. On 6000, remove speedometer cluster bezel and lens.
  3. On all models, pull cluster out slightly and disconnect speedometer cable and wiring harness connector(s). Remove speedometer cluster. On Phoenix and 6000, remove auxiliary instrument (or warning lamp) cluster. Remove trim plates and cluster retaining screws.
  4. Pull out cluster, disconnect wiring harness connector(s) and remove cluster. Remove printed circuit. Remove snap-in bulbs and wiring harness connectors from back of speedometer cluster. Remove nuts retaining circuit to housing and remove printed circuit. Reverse removal procedure to install.
scientia non olet · About LEMON Manuals