LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1983 >> 2000 Sunbird Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L 4-CYL OHV - VIN [P] >> Removal & Installation >> Water Pump >> Installation

Water Pump: Installation

  1. Clean all gasket surfaces. Apply sealer to pump gasket and position gasket on pump. Position pump on engine, install retaining bolts and tighten.
  2. Install water pump pulley and alternator. Install and adjust drive belts. Reverse removal procedure to complete installation.
NOTE: For further information on cooling system capacities and other cooling system components, see ENGINE COOLING SYSTEMS article in this section.