Exhaust Manifold: Removal
- Disconnect battery negative cable. Remove air cleaner assembly. Remove oil dipstick and air cleaner hot air duct-to-shroud bolt.
- Remove air cleaner hot air duct and hose. Remove dipstick tube bracket bolt. If equipped, remove A/C suction line bracket bolt. Disconnect O2 sensor bracket.
- Remove alternator belt, bracket bolts and spacer. Remove alternator support bracket. Remove pulsair pipe (if equipped). Raise vehicle and disconnect exhaust inlet pipe at manifold.
- Lower vehicle and disconnect air management-to-check valve hose and bracket. If equipped with A/C, remove suction-line bracket. Remove exhaust manifold bolts. Remove manifold.