LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1983 >> 2000 Sunbird Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL OHC - VIN [G] >> Removal & Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

  1. Remove air cleaner and drain cooling system. Remove alternator and bracket from camshaft carrier. Loosen power steering pump bolts and support pump.
  2. Remove power steering bracket from intake manifold. Remove ignition coil. Remove throttle cable from intake manifold bracket.
  3. Disconnect throttle, downshift and TV cables from fuel injection assembly. Disconnect all wiring harness connectors from throttle body. Remove brake vacuum hose at filter.
  4. Disconnect fuel lines. Remove preheat water hose from water pump and intake manifold. Remove "S" hose from water pump. Disconnect ECM connectors as necessary to move harness away from manifold. Support ECM harness out of way.
  5. Remove 4 lower and 5 upper intake manifold retaining nuts and washers. Remove intake manifold.
scientia non olet · About LEMON Manuals