LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1983 >> 2000 Sunbird Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L 4-CYL OHC - VIN [G] >> Overhaul >> Rear Main Bearing Oil Seal >> Installation

Rear Main Bearing Oil Seal: Installation

  1. Clean seal mating surface. Check crankshaft for scratches or nicks and repair as necessary.
  2. Install seal onto seal driver (J-33004 or equivalent), and lubricate inside of seal with engine oil. Tighten seal installer bolts until seal bottoms in block.
scientia non olet · About LEMON Manuals