Idle Speed (With Solenoid)
- Warm engine to normal operating temperature and adjust timing. With A/C off, turn idle speed screw to adjust curb idle.
- Disconnect compressor clutch wire and turn A/C on. Open throttle slightly to allow plunger to extend. Turn solenoid plunger to obtain correct solenoid RPM. Reconnect compressor clutch wire.
- Disconnect EGR valve vacuum line at carburetor and plug carburetor port. Place adjustment screw on high step of fast idle cam and adjust fast idle RPM. Remove test equipment and reconnect all hoses.
Fast Idle Speed (RPM)
| Application |
RPM |
| 1.6L |
2.5L |
| 2500 |
2600 |
Idle Speed (RPM)
| Application |
Curb Idle |
Solenoid Energized |
| 1.6L |
| |
Man. Trans |
800 |
1150 |
| |
Auto. Trans |
700 |
1400 |
| 2.5L |
| |
Man. Trans. |
| |
|
With A/C |
|
|
| |
|
Without A/C |
800 |
1000 |
| |
Auto. Trans. |
| |
|
With A/C |
|
|
| |
|
Without A/C |
550 |
675 |