LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1981 >> T1000 2D Hatchback, Automatic Trans >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Wiper/Washer Systems - Round Wiper Motor >> Removal & Installation >> Wiper Motor Gearbox >> Removal (Drive Gear)

Removal (Drive Gear)

  1. Remove washer pump. Clamp crank arm in a vise before removing retaining nut. Remove crank arm, rubber seal cap, retaining ring, shims, shield and spacer washer.
    CAUTION: Failure to clamp crank arm in a vise may result in stripping gear.
  2. Slide gear assembly out of housing. Slide drive plate and shaft out of gear. Remove drive pawl, lock pawl and coil spring as required.