LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1981 >> T1000 2D Hatchback, Automatic Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Wheel Bearing Adjustment >> Adjustment >> CHRYSLER Corp. >> Rear Wheel Drive (Front)

Rear Wheel Drive (Front)

Tighten adjusting nut to 240-300 INCH Lbs. while rotating wheel. Stop rotation and back off adjusting nut to completely release bearing preload. Finger tighten adjusting nut. Position locking nut over adjusting nut and install cotter pin. Adjustment should provide 0.001 - 0.003" end play.

scientia non olet · About LEMON Manuals