LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 1981 >> T1000 2D Hatchback, Automatic Trans >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Wheel Hubs >> Wheel Bearing Adjustment >> Adjustment >> CHRYSLER Corp. >> Front Wheel Drive (Rear)

Front Wheel Drive (Rear)

Rotate wheel by hand and tighten adjusting nut to 240-300 INCH Lbs. Stop rotation and back off adjusting nut to release bearing preload completely. Finger tighten adjusting nut. Position locking nut over adjusting nut and install new cotter pin. Adjustment should provide 0.001 - 0.003" end play.

scientia non olet · About LEMON Manuals