Corvette (1970-73) (Rear Wheels): Camber

Camber adjustments are made by turning cam type through bolt which rides within channels on strut rod bracket. To change camber setting, loosen locknut on cam bolt, turn the cam to desired setting, then torque lock nut to 60 ft. lbs.

Add or remove shims equally at both front and rear of shaft attaching bolts. To increase camber, remove shims at both front and rear of bolts. To decrease camber, add shims at both front and rear of bolts. Removal or installation of.020" shims will change camber 1/8° (1964 exc. F-85);.030" shims will change camber 1/8° (1965-71 exc. F-85); 1/4° (1964-71 F-85); 3/16° (1972 F-85); 5/32° (1972 All Others).