LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 2000 >> Neon Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Wheel Bearings >> Installation

Rear Wheel Bearings: Installation

  1. To install, reverse removal procedure. Using NEW hub and bearing assembly-to-rear spindle nut, tighten nut to specification. Tighten caliper guide pin bolts to specification. See TORQUE SPECIFICATIONS .
  2. Install wheels. Tighten wheel nuts in crisscross sequence to half torque, then repeat tightening sequence to full torque. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals