Power Brake Booster: Removal
- Remove master cylinder. See MASTER CYLINDER for non-ABS models. For models with ABS, see appropriate ANTI-LOCK article.
- Remove ICU if ABS equipped. Disconnect vacuum hoses from check valve on power booster, but DO NOT remove check valve from booster. On PT Cruiser, remove silencer pad below knee blocker inside vehicle. Fold down and remove knee blocker.
- On all models, from inside of vehicle, use screwdriver to pull retaining clip off brake pedal pin. Remove 4 nuts attaching brake booster to instrument panel. Slide brake booster forward and remove from vehicle.