NOTE:
Many of the diagnostic tests of the air bag restraint system require voltage or resistance checks at various system connector terminals. See Fig 1
-12.
Fig 1: Identifying Data Link Connector (DLC) Terminals
Courtesy of DAIMLERCHRYSLER CORP.
Fig 2: Identifying Junction Block Fuse Locations
Courtesy of DAIMLERCHRYSLER CORP.
Fig 3: Identifying Instrument Cluster Red & Blue 13-Pin Connector Terminals
Courtesy of DAIMLERCHRYSLER CORP.
Fig 4: Identifying Air Bag Control Module (ACM) 4-Pin Connector Terminals
Courtesy of DAIMLERCHRYSLER CORP.
Fig 5: Identifying Air Bag Control Module (ACM) 13-Pin Connector Terminals
Courtesy of DAIMLERCHRYSLER CORP.
Fig 6: Identifying Body Control Module (BCM) 22-Pin Connector Terminals