CHEC 1 - Gauge Display
- If all gauges fail to move, replace Cluster Printed Circuit (PC) Board.
- If any gauge fails to move, replace gauge assembly.
- If any gauge(s) does not display as indicated, replace Cluster Printed Circuit Board. See CHEC 1 - GAUGE DISPLAY .
CHEC 1 - GAUGE DISPLAY
| Application | Display |
|---|---|
| Oil Gauge Pointer ON | H |
| Speedometer | 125 MPH (201 Km/h) |
| Fuel Gauge Pointer ON | 3/4 |
| Temperature Gauge Pointer ON | 3/4 |
| Oil Gauge Pointer ON | 1/2 |
| Speedometer | 90 MPH (145 Km/h) |
| Fuel Gauge Pointer ON | L |
| Speedometer | 70 MPH (121 Km/h) |
| Fuel Gauge Pointer ON | Mid-Scale |
| Oil Gauge Pointer ON | L |
| Speedometer | 25 MPH (40 Km/h) |
| Fuel GaugePointer ON | E |
| Temperature Gauge Poniter ON | C |