LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1997 >> Prowler >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Chime Warning & Reminder System >> Diagnosis & Testing >> Chime System - Symptom Diagnosis >> No Fasten Seat Belt Lamp When Ignition Switch Is Turned ON

No Fasten Seat Belt Lamp When Ignition Switch Is Turned ON

  1. Ensure instrument cluster is operating and seat belt lamp is not burned out. Use a multi-meter and test 2 connectors at rear of cluster for the following:
    • Battery feed Pin 5 of Red connector.
    • Ignition Feed at Pin 5 of Blue connector with ignition switch in run position.
  2. It results of Step 1) are not as specified, repair circuits as necessary.
scientia non olet · About LEMON Manuals