Safety Precautions
WARNING:
Eye protection should be used when servicing glass components to avoid personal injury.
CAUTION:
DO NOT touch glass or halogen bulbs with fingers or any possibly oily surface, reduced bulb life will result. DO NOT use bulbs with higher candle power than specified. Damage to lamp can result. DO NOT use fuses, circuit breakers or relays having greater amperage value than specified. See FUSES & CIRCUIT BREAKERS
article.
When it is necessary to remove components to service another, it should not be necessary to apply excessive force or bend a component to remove it. Before damaging a trim component, verify hidden fasteners or captured edges are not holding component in place.