LEMON Manuals: Even more car manuals for everyone
Home >> Plymouth >> 1992 >> Sundance Base, 2D Hatchback, 2.2 D, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Disc & Drum) >> Removal & Installation >> Rear Brake Caliper & Pads >> Removal

Rear Brake Caliper & Pads: Removal

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Plymouth Sundance, 1991 Plymouth Acclaim, 1991 Dodge Spirit, 1991 Dodge Shadow, and 1991 Dodge Dynasty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. Remove wheel and tire assembly. Release parking brake and cycle brake pedal. Manually pull caliper assembly toward outside of vehicle so piston is retracted.
  2. Drive out disc pad retainer pin and remove 2 caliper mounting bolts. See Fig 1 . Lift caliper up, away from disc. Suspend caliper on wire hook to prevent damage to brake hose. Remove disc pads.
Fig 1: Retainer Pin R & I (AC & AY Bodies)
G56241Courtesy of CHRYSLER MOTORS.